SLINGS

Archive for the ‘FIRST AID, BANDAGES AND SLINGS’ Category

SLINGS

Posted in FIRST AID, BANDAGES AND SLINGS, tagged ARM SLING, CUFF AND COLLAR SLING, first aid, SLINGS, ST JOHN SLING 

 | 

Slings
Slings are used to support an injured arm, or to supplement treatment for another injury such as fractured ribs. Generally, the most effective sling is made with a triangular bandage. Every first aid kit, no matter how small, should have at least two of these bandages as essential items.
Although triangular bandages are preferable, any material, ex. tie, belt, or piece of twine or rope, can be used in an emergency. If no likely material is to hand, and injured arm can be adequately supported by inserting it inside the casualty’s shirt or blouse. Similarly, a safety pin applied to a sleeve and secured to clothing on the chest may suffice.
There are essentially three types of sling; the arm sling for injuries to the forearm, the St John sling for injuries to the shoulder, and the ‘collar-and-cuff’ or clove hitch for injuries to the upper arm and as supplementary support to fractured ribs.
On application of any sling, always check the circulation to the limb by feeling for the pulse at the wrist, or squeezing a fingernail and observing for change of color in the nail bed.
The Arm Sling

1. Support the injured forearm approximately parallel to the ground with the wrist slightly higher than the elbow.
2. Place an open triangular bandage between the body and the arm, with its apex towards the elbow.
3. Extend the upper point of the bandage over the shoulder on the uninjured side.
4. Bring the lower point up over the arm, across the shoulder on the injured side to join the upper point and tie firmly with a reef knot.
5. Ensure the elbow is secured by folding the excess bandage over the elbow and securing with a safety pin.
St John Sling
1. Support the casualty’s arm with the elbow beside the body and the hand extended towards the uninjured shoulder.
2. Place an opened triangular bandage over the forearm and hand, with the apex towards the elbow.
3. Extend the upper point of the bandage over the uninjured shoulder.
4. Tuck the lower part of the bandage under the injured arm, bring it under the elbow and around the back and extend the lower point up to meet the upper point at the shoulder.
5. Tie firmly with a reef knot.
6. Secure the elbow by folding the excess material and applying a safety pin, then ensure that the sling is tucked under the arm giving firm support.
‘Collar-and-Cuff’ (Clove Hitch)
1. Allow the elbow to hang naturally at the side and place the hand extended towards the shoulder on the uninjured side.
2. Form a clove hitch by forming two loops — one towards you, one away from you.
3. Put the loops together by sliding your hands under the loops and closing with a “clapping” motion. If you are experienced at forming a clove hitch, then apply a clove hitch directly on the wrist, but take care not to move the injured arm.
4. Slide the clove hitch over the hand and gently pull it firmly to secure the wrist.
5. Extend the points of the bandage to either side of the neck and tie firmly with a reef knot.
6. Allow the arm to hang comfortably. Should further support be required, ex. For support to fractured ribs, apply triangular bandages around the body and upper arm to hold the arm firmly against the chest.